Fixed example formatting a bit.

git-svn-id: https://bucket.mit.edu/svn/nilm/acquisition/ethstream@7464 ddd99763-3ecb-0310-9145-efcb8ce7c51f

example.h

 
 char examplestring[] = "\n\
 \n\
-Welcome to the NILM Ethstream examples.\n\
+    Welcome to the NILM Ethstream examples.\n\
 \n\
 For the most part, typing \"ethstream\" by itself will sample the first\n\
 two channels at 8 kHz on 10V range.  Press CTRL-C to terminate sampling.\n\
@@ -9,14 +9,14 @@ two channels at 8 kHz on 10V range.  Press CTRL-C to terminate sampling.\n\
 If you want a voltage and current measurement on the first phase of NILM\n\
 with default sample rate of 8 kHz and 10V range:\n\
 \n\
-ethstream -C 0,3\n\
+   ethstream -C 0,3\n\
 \n\
 The device is configured so that channels 0 through 2 are voltages for\n\
 the three phases and channels 3-5 are for currents of the three phases\n\
 \n\
 If you want only voltages at 16 kHz and 10V range:\n\
 \n\
-ethstream -n 3 -r 16000\n\
+    ethstream -n 3 -r 16000\n\
 \n\
 The -n option samples a number of channels starting at 0. The rate can be\n\
 at least 16000 if 12 channels are sampled , but it can do more if\n\
@@ -30,42 +30,42 @@ permanent damage to NILM or NerdJack.\n\
 \n\
 If you need a higher accuracy but lower range measurement on the currents:\n\
 \n\
-ethstream -R 5,10 -C 3,4,5\n\
+    ethstream -R 5,10 -C 3,4,5\n\
 \n\
 The two numbers to the R command set the range to either 5V or 10V. Above,\n\
-    we are setting channels 0-5 to 5 V range and channels 6-11 to 10 V range.\n\
-    Channels 6-11 are unconnected, but they can have range set independently.\n\
-    The values here depend on the NILM box settings to the current transducers.\n\
-    The value read is the voltage seen by the NerdJack.\n\
+we are setting channels 0-5 to 5 V range and channels 6-11 to 10 V range.\n\
+Channels 6-11 are unconnected, but they can have range set independently.\n\
+The values here depend on the NILM box settings to the current transducers.\n\
+The value read is the voltage seen by the NerdJack.\n\
 \n\
-    All of the above examples output a digital number from 0 to 65535 with\n\
-    65535 representing the highest range (5V or 10V).  If you want conversion\n\
-    to volts for all six voltages and currents:\n\
+All of the above examples output a digital number from 0 to 65535 with\n\
+65535 representing the highest range (5V or 10V).  If you want conversion\n\
+to volts for all six voltages and currents:\n\
 \n\
     ethstream -c -C 0,3,1,4,2,5\n\
 \n\
-    The channels will be output in the order given in the C command.  This\n\
-    command will group the current and voltage data by phase.\n\
+The channels will be output in the order given in the C command.  This\n\
+command will group the current and voltage data by phase.\n\
 \n\
-    If you are supplying data from ethstream to another program, you might\n\
-    want to dump its output to a file and terminate after a certain number of\n\
-    samples:\n\
+If you are supplying data from ethstream to another program, you might\n\
+want to dump its output to a file and terminate after a certain number of\n\
+samples:\n\
 \n\
     ethstream -n 6 -r 8000 - l 16000 > outfile.dat\n\
 \n\
-    This will take 16000 samples at 8 kHz (2 seconds of acquisition) of all\n\
-    channels and write the data to outfile.dat.  This can be directly read\n\
-    by a package like MATLAB.\n\
+This will take 16000 samples at 8 kHz (2 seconds of acquisition) of all\n\
+channels and write the data to outfile.dat.  This can be directly read\n\
+by a package like MATLAB.\n\
 \n\
-    If there are multiple NerdJacks or you have changed the TCP/IP settings\n\
-    from default, you might have to specify which one you want to talk to:\n\
+If there are multiple NerdJacks or you have changed the TCP/IP settings\n\
+from default, you might have to specify which one you want to talk to:\n\
 \n\
     ethstream -a 192.168.1.210\n\
 \n\
-    This will sample two channels at 8 kHz from the NerdJack at 192.168.1.210.\n\
-    This is the default \"1\" setting on the NerdJack.  If no address is\n\
-    specified, ethstream connects first to 192.168.1.209.  It then tries\n\
-    to autodetect the NerdJack.  This should find the device if you are on\n\
-    the same network, but it will get confused if there are multiple NerdJacks\n\
-    on the network.\n\
+This will sample two channels at 8 kHz from the NerdJack at 192.168.1.210.\n\
+This is the default \"1\" setting on the NerdJack.  If no address is\n\
+specified, ethstream connects first to 192.168.1.209.  It then tries\n\
+to autodetect the NerdJack.  This should find the device if you are on\n\
+the same network, but it will get confused if there are multiple NerdJacks\n\
+on the network.\n\
 ";